Silica Alumina Gel(Type H)
|
Introduction
| Silica alumina gel (Type H) | ||
| Appearance | Color: faint yellow Shape: Sphere | |
| Application | Mainly used of separating light hydrocarbon from natural gas, the product can reduce dew point of hydrocarbon to produce natural gas gasoline , drying natural gas at the same time .Add 20% (wt) HY-W as the protective layer if water drip exits in separation system. In addition ,it can be used as common dryer ,catalyst and its carrier ,variable 鈥損ressure adsorption separation agent (PSA). As variable-temperature adsorption separation agent (TSA) at higher temperature, it performs especially suitable. | |
| Technical Data锛 | ||
| ITEM | Typical values | |
| SiO2,% | Approx .97 | |
| Al2O3,% | Approx .3 | |
| Surface area(BET) , 銕/g | 750 | |
| Pore Volume | 0.4cm3/g | |
| Equilibrium Capacity for Water Vapor at 25鈩 |
10% R.H | 6.5wt.% |
| 80% R.H. | 42 wt.% | |
| Packed Bulk density kg/L | 0.8 | |
| Crushing strength N/particle | 200 | |
| Attrition Rate | 0.05wt. % | |
| Liquid Water Resistance | No | |
| Sizes:2.0鈥5.0mm | ||
| [Packaging] 850kgs per big bag or 150kgs per steel drums. | ||
| [Note](1) Packing and size may be customized per your specific requirements; (2) Crushing strength has relation with the particle size . | ||
PRODUCT TYPE
